Upvc Door Replacement Lock 10 Things I'd Like To Have Known Earlier

· 6 min read
Upvc Door Replacement Lock 10 Things I'd Like To Have Known Earlier

How to Replace a UPVC Door Replacement Lock

If your door lock jams or doesn't function in the way it should, you might want to replace it. The procedure may seem complex but it's actually simple and doesn't require a locksmith.

A few basic tools along with a bit of patience and plenty of care should do the trick. Here's what you must do:

Take a measurement of the door

If you're having difficulty locking your uPVC door or it isn't closing and lock, it's time for a replacement. If you've recently relocated or a tenant has moved out without returning the keys, or your multipoint gear box is showing signs of wear and tear, it's simple to swap out the barrel on your lock to an alternative that offers an extra layer of security.



Before buying a replacement lock, you'll need to gather some key measurements to ensure the new cylinder fits correctly and won't affect your security at home. The backset is the most critical. This is the distance from the centre of the keyhole bore hole to the edge of the door. It's usually around 2 3/8 or 2 3/4 inches. Use rulers or measuring tapes to measure this and record the results on paper or a notepad.

You should also know what the thickness of the faceplate is. This is the measurement of the part that covers the mechanism of the lock. If possible, purchase an alternate lock manufactured by the same manufacturer, as they'll be made according to the same dimensions. If you can't find the manufacturers name or mark, simply determine the width of your existing cylinder. You can also check this by putting a pencil in the keyhole and measuring from the top of the lock up to the centre of the pencil mark on each side of the cylinder.

Once you have the dimensions you can begin the process of removing the old cylinder. Start by loosening the screw that holds the handle in place using the Phillips-head driver, and then loosen the screws that connect the interior and exterior handles to each other. Once these screws are removed, you are able to take off the barrel screw on the handle's exterior and pull the cylinder out.

If the cylinder is stuck in the lock, you can use WD-40, or another fluid. It is crucial not to push it out. Forcing it out can cause damage to your lock's internal gearbox. Consider upgrading to a lock that has anti-snap, anti-bump and anti-snap security. This will make it more resistant to attacks from thieves.

Source the Lock

When purchasing a new door lock, you need to consider the following aspects. Make sure you have the correct size cylinder for your door, and that you're buying from a trusted brand to ensure a perfect fit and quality. You'll also require some basic tools for the job, such as tape measure, screwdriver and rubber mallet.

There are several indicators that your upvc lock is in danger of wearing out and requires replacement. The lock could be showing visible damage or the handle may be loose and not fit correctly. If the lock is jamming or isn't locking at all, it's time for a replacement.

After you've chosen the best lock, it's crucial to get it installed correctly so that it works correctly and locks securely. Always follow  door lock repairs braintree repairmywindowsanddoors  to fix the new multipoint lock mechanism onto the door's upvc panel and attach the correct handles and faceplates. Test the mechanism by locking the door and then unlocking it from both the outside and inside. When you've finished the job and are happy with the results, it's time to have a celebration.

It can be difficult to change a upvc lock, but you can do it yourself with the help of a locksmith. If you can recognize the signs that your lock is in need to be replaced and having the tools needed, it can be relatively easy to complete.

Remember that like any moving part the door lock made of upvc will benefit from some lubrication to run smoothly. A few sprays or a little graphite powder can extend their lifespan by reducing excessive friction. Regular cleaning with a damp cloth and WD-40 can also go a long way towards keeping your door lock mechanisms in top condition.

Take out the Cylinder

If you're having trouble with your doors made of upvc, it may be time to change the barrel on your lock. This is an easy DIY project that can be done in just few minutes, and is an effective method to ensure your home security. The key to this process is identifying the manufacturer of your existing lock so that you can locate a suitable replacement.

A damaged door lock could be a huge hassle, and it can also be a security risk. It's not uncommon for locks on uPVC doors to experience issues, and it's important to ensure regular maintenance. Experts recommend replacing your lock every seven to eight years. If your lock is in a state of extreme damage or you're not happy with its performance, it's certainly worth seeking help from an expert.

For uPVC, a simple pin system called the euro cylinder will be utilized in the majority of cases. They are easy to use and are not likely to fail, but they can be vulnerable. In the end it's a good idea to replace the lock's cylinder by a newer model that incorporates anti-snap and anti-bump protection to guard against burglary.

The first step in changing your uPVC locks is to take off the handle. This will expose the old cylinder. This can be a little difficult as there are typically several screws concealed beneath the handles, so make sure you have a screwdriver in your bag. You'll need to gently pull and move the cylindrical until it is loose. When it is loose then you can remove it out of the socket.

Once you've sourced an appropriate replacement, it's just an issue of screwing it in place and then reverse the removal process. Be cautious not to over tighten as this can cause the cylinder to get stuck inside the door and not function as it should. Test the uPVC replacement lock by opening it and closing it both from both sides. You should now be able to lock and unlock the door with your key. If not, make sure that the screws are tightened, then try again.

Install the Lock

You'll need to conduct some research to make sure the lock you choose is appropriate for your door. You'll be required to be aware of the faceplate and backset measurements - which is the distance from the edge of the door to the centre of the handle or cylinder - as well as the lock type to ensure the new lock fits properly without compromising security.

After you've completed this, you're now ready to begin installing the new lock. Ideally, you should prop the door open or secure it to ensure that it doesn't shut during the process. The first step is to loosen the screws that hold the handle together using a Phillips-head screwdriver. After they've been removed, you should be able to slide the inner and outer handle apart.

It is now possible to remove the old cylinder using a screwdriver. it. Once you've removed your cylinder then you'll be able to install the replacement lock, ensuring that you follow the directions for the particular model you have. Once the lock is in place you can test the new lock by removing and closing the door from the inside and outside as well as locking and unlocking it from the inside and then retesting it.

There are many reasons to consider to change the locks on your uPVC door. You may have just moved in and not had keys. The previous tenant may not have returned it. You might also want to upgrade your lock to one that is more secure. Whatever the reason, changing the lock cylinder is straightforward and shouldn't take more than five minutes.

No matter if your uPVC doors have multipoint or single-point locks, they all have the same mechanism. There are some issues that can arise like the failure to close or jam. This can be due to wear and tear, weather conditions, or simply due to daily usage. Luckily, most of these issues can be resolved with some minor maintenance or with the help of locksmith.